Add: No. 19, Rongle Road, Economic Development Zone, Changxing County, Huzhou City, Zhejiang Province, China
E-mail: [email protected]
Welded stainless steel serpentuator tube, as the name suggests, is a stainless steel welded pipe that looks like a snake. It is a long pipe formed by wei bending and forming a plurality of stainless steel U-shaped pipes. It is mainly used in condenser unit equipment.
When the stainless steel serpentine pipe is used in the condenser, the air tightness of the pipe is relatively high. He requires that the pipe should not leak at all, because if the stainless steel serpentine pipe is installed on the equipment, if there is leakage, it will affect the use of the entire equipment. It is necessary to dismantle the equipment to take out the leaking pipe, which will undoubtedly cause a lot of cost waste, so this puts forward extremely high requirements for the manufacturers of stainless steel serpentine pipes.
Heat exchange tube is an important heat exchange element in chemical production, but heat exchange tubes of different materials have different heat exchange performance. For example, stainless steel heat exchange tube has the characteristics of high heat transfer efficiency, because stainless steel heat exchange tube adopts 0.5-0.8mm The thin-walled stainless steel pipe material improves the overall heat exchange performance. Under the same heat exchange area, the overall heat transfer coefficient of the stainless steel heat exchange pipe is 2.121-8.408% higher than that of the copper pipe;
It has good corrosion resistance, because the stainless steel heat exchange tube is made of stainless steel. Of course, the corrosion resistance of the stainless steel heat exchange tube made of duplex stainless steel tube is better than that of 316L austenitic stainless steel heat exchange tube. ; Its anti-fouling performance is relatively good, especially the inner wall of the stainless steel heat exchange light tube is smooth, which reduces the thickness of the bottom layer of the boundary laminar flow and improves the anti-fouling performance... Then, do you know the specifications of the stainless steel heat exchange tube How is it? Are all stainless steel heat exchanger tubes the same size?
The specifications of stainless steel heat exchange tubes are different. Reasons: There are many types of stainless steel heat exchange tubes, such as stainless steel plain tubes, stainless steel corrugated tubes, stainless steel threaded tubes, stainless steel inner wave tubes, stainless steel bamboo tubes, stainless steel U-shaped tubes, and stainless steel serpentine tubes. Tubes, stainless steel coils, etc., and stainless steel bare tubes are divided into stainless steel welded bare tubes, stainless steel welded elliptical tubes, and stainless steel welded flat elliptical tubes. Different stainless steel heat exchange tubes have different specifications.
Moreover, in the production of each chemical enterprise, the medium used for heat exchange of stainless steel heat exchange tubes is different, it may be hot water, it may be corrosive liquid, and the working conditions of stainless steel heat exchange tubes are different, naturally the actual stainless steel used The specifications of heat exchange tubes are different and can be stainless steel heat exchange tubes of special size.
However, this special size stainless steel heat exchange tube needs to be customized by a professional stainless steel heat exchange tube manufacturer, and it must be specified in detail. Stainless steel heat exchange tube.
I hope this content is helpful to you, we are a professional stainless steel pipe supplier, if you have any product needs, please contact us.