How To Deal With The Bending Process Of Stainless Steel Oval Tube?

Update:28 Jan
Abstract:Stainless steel pipe fittings are a kind of pipe fittings. They are made of stainless steel, so they are called stainless steel pipe fittings. They in

Stainless steel pipe fittings are a kind of pipe fittings. They are made of stainless steel, so they are called stainless steel pipe fittings. They include stainless steel elbows, stainless steel tees, stainless steel crosses, stainless steel reducers, stainless steel caps, etc., according to the connection method. It is divided into four categories: socket stainless steel pipe fittings, threaded stainless steel pipe fittings, flange stainless steel pipe fittings, and welded stainless steel pipe fittings. Stainless steel elbows are used where pipe fittings turn; flanges are used to connect pipes and pipes to each other and are connected to pipe ends; stainless steel tee pipes are used where three pipes meet; stainless steel four-way pipes are used for four pipes. Places; Stain steel reducers are used where two pipes of different diameters are connected.

What types of stainless steel pipe fittings are there?
seamless pipe, welded pipe, seamed pipe,
Decorative tubes, industrial tubes, cold rolled tubes,
Hot rolled tube, square tube, rectangular tube,
Capillary, sanitary tube, oval tube, special-shaped tube

How to deal with the bending process of stainless steel oval tube?
The bending method of stainless steel oval tubes generally adopts the cam principle method. The result of how many times of verification is done by using the cam principle method to process multi-arc thin-wall stainless steel elliptical tubes. Everyone has heard of the cam. When the camshaft rotates, the follower and the cam contour line are connected correctly, and the follower performs reciprocating motion. According to this principle: as long as 5 arcs are designed on one mold, and the length of the center layer of each arc is equal to the length of the center layer of the product arc (because the rebound is larger, the R on the mold is smaller than the R on the product), The center of the mold with a large angle between the center of the arc is used as the center of rotation, and the follower is an air cylinder. Due to the compressibility of the gas, a pressure reducing valve can be used to adjust the air pressure. If the bending pressure is high, a double force air cylinder can be used. , the cylinder rod is connected to the curved roller seat, and there is a guide rail under the roller seat. The key factors affecting the wrinkling of the elliptical tube are the bending speed and the lining material of the elliptical tube. How to control the bending speed can use the proportional flow valve to control the speed of the main cylinder. When the object has a small bending radius R, the speed control should be appropriate.

Dingshang Stainless Steel Co., Ltd. is a stainless steel pipe manufacturer and stainless steel tube supplier in China. It specializes in wholesale and sales of stainless steel pipes/tubes. Welcome to consult.